Zombie-F's Photobucket Lantern album media

Done! Hellacious red light!!!

Zombie-F — Sun, 17 Jul 2005 08:42:46 MDT

Zombie-F posted a photo

Done! Hellacious red light!!! - lantern-20.jpg

Bottom hole where battery is accessed

Zombie-F — Sun, 17 Jul 2005 08:42:44 MDT

Zombie-F posted a photo

Bottom hole where battery is accessed - lantern-19.jpg

Topside of mounted LED assembly

Zombie-F — Sun, 17 Jul 2005 08:42:43 MDT

Zombie-F posted a photo

Topside of mounted LED assembly - lantern-18.jpg

Underside of mounted LED assembly

Zombie-F — Sun, 17 Jul 2005 08:42:42 MDT

Zombie-F posted a photo

Underside of mounted LED assembly - lantern-17.jpg

Remember, put nuts and washers on before soldering

Zombie-F — Sun, 17 Jul 2005 08:42:41 MDT

Zombie-F posted a photo

Remember, put nuts and washers on before soldering - lantern-16.jpg

Then, black wire to black wire

Zombie-F — Sun, 17 Jul 2005 08:42:39 MDT

Zombie-F posted a photo

Then, black wire to black wire - lantern-15.jpg

Resistor then gets soldered to long lead on LED

Zombie-F — Sun, 17 Jul 2005 08:42:38 MDT

Zombie-F posted a photo

Resistor then gets soldered to long lead on LED - lantern-14.jpg

Solder resistor to red wire

Zombie-F — Sun, 17 Jul 2005 08:42:37 MDT

Zombie-F posted a photo

Solder resistor to red wire - lantern-13.jpg

Battery clip and resistor

Zombie-F — Sun, 17 Jul 2005 08:42:36 MDT

Zombie-F posted a photo

Battery clip and resistor - lantern-12.jpg

Then smooth this mess up and make it round

Zombie-F — Sat, 16 Jul 2005 18:39:38 MDT

Zombie-F posted a photo

Then smooth this mess up and make it round - lantern-11.jpg

Start cutting a hole in the bottom with dremel

Zombie-F — Sat, 16 Jul 2005 18:39:37 MDT

Zombie-F posted a photo

Start cutting a hole in the bottom with dremel - lantern-10.jpg

Round up the hole and file it smooth

Zombie-F — Sat, 16 Jul 2005 18:39:35 MDT

Zombie-F posted a photo

Round up the hole and file it smooth - lantern-09.jpg

Cut away this piece from the wick holder

Zombie-F — Sat, 16 Jul 2005 18:39:34 MDT

Zombie-F posted a photo

Cut away this piece from the wick holder - lantern-08.jpg

Underside of mounted LED

Zombie-F — Sat, 16 Jul 2005 18:39:32 MDT

Zombie-F posted a photo

Underside of mounted LED - lantern-07.jpg

Closeup of LED mounted to wick hole

Zombie-F — Sat, 16 Jul 2005 18:39:30 MDT

Zombie-F posted a photo

Closeup of LED mounted to wick hole - lantern-06.jpg

Glass with etching paste on it

Zombie-F — Sat, 16 Jul 2005 18:39:29 MDT

Zombie-F posted a photo

Glass with etching paste on it - lantern-05.jpg

Acid didn\'t work, so glass etching paste is needed

Zombie-F — Sat, 16 Jul 2005 18:39:28 MDT

Zombie-F posted a photo

Acid didn\'t work, so glass etching paste is needed - lantern-04.jpg

After a dusting of black spraypaint

Zombie-F — Sat, 16 Jul 2005 18:39:26 MDT

Zombie-F posted a photo

After a dusting of black spraypaint - lantern-03.jpg

After a dusting of white spraypaint

Zombie-F — Sat, 16 Jul 2005 18:39:25 MDT

Zombie-F posted a photo

After a dusting of white spraypaint - lantern-02.jpg

All the stuff you\'ll need

Zombie-F — Sat, 16 Jul 2005 18:39:24 MDT

Zombie-F posted a photo

All the stuff you\'ll need - lantern-01.jpg